How to solve the common problems of HRD-838 yarn warping machine

10 Jun 2022

Checking yarn warping machine HRD-838 is devided into four steps, which is checking the wiring problem, set date, the BRAKE and RESET.

Supply

Electricity, Yarn

Tools

Beam

Method

1. Plug power and turn on the power switchto check if the wiring problem of the warping machine.

2. The Warp Specification means the Daniel. Please set data by reality and you can review the operation instruction.

3. Turning on the BRAKE and then try to roll the beam by hand. At this time, the beam should motionless. If the beam was rolled, It means some problem happening to BRAKE. Please contact us and send us photos like these above.

4. After finishing threading the yarn, Turn on the BRAKE. And then Click the RESET by touch screen. The start button can be press after RESET.

Keywords: yarn warping machine

Originally published 10 Jun 2022, updated 10 Jun 2022.