How to use the HRD-828 Fully-Automatic Two Spindles Yarn Winding Machine

17 Oct 2025

Operating a yarn winding machine involves four steps: plugging in power, threading yarn, adding bobbins, setting parameters before starting the machine.

Tools

Electricity, Bobbins, Yarn

Method

1. Plugging in power

Inserting the power plug and turn on the power switch.

2. Threading yarn

The following pictures show the complete process of threading the yarn in detail. Place the yarn cone that requires winding on the floor. Then pass the yarn through the ceramic eyelet on the creel, the yarn presser and yarn broken device on the creel, and finally guide it through the yarn closer to be wound onto the bobbin.

3. Add bobbins

Place the bobbins into the aluminum chute. Each chute can contain 15 bobbins.

4. Setting parameters and starting the machine

The first step is to set the “Length Effective” .The second step is to set the winding number for the yarn on the control panel of touchscreen.The final step is to press the green button“run”. The machine will then start running. The finished product is shown in the following pictures.

The length of winding yarn is uniform, and the yarn can be change at on time on the braiding machine, so the downtime can be reduced, and the output can be increase by 20%-30%, which greatly reduces yarn waste and save labor.

Keywords: yarn winding machine

Originally published 17 Oct 2025, updated 17 Oct 2025.