How to use the HRD-839 Yarn pulling Machine

03 Jun 2022

Using yarn pulling machine is divided into four steps, which is Plug power, thread yarn, put the yarn bobbin, adjusting parameters and start the machine.

Supply

Electricity, Yarn

Tools

Bobbins

Method

1. Plug power and then turn on the light switch to start the machine.

2. The yarns on both sides pass from the rear of the machine through the yarn presser, the yarn breaker (counter wheel) and finally to the yarn combiner into the machine.

3. The feeders on both sides are placed in the appropriate spool for the required winding.

4. Click the Enter, and you will enter the control board. adjust the number of bobbin windings of the machine screen parameters according to the actual needs. Finally, click run on the display, the machine starts running.

Keywords: yarn pulling machine

Originally published 03 Jun 2022, updated 03 Jun 2022.